
Dynamic Seals
Scraper
A scraper prevents the adhering dirt and dust of the rod from being drawn into hydraulic and pneumatic systems. Scrapers exist in a variety of materials; the most common ones are PTFE (with or without fillers), elastomer and polyurethane.
Scraper A9
The Scraper A9 is a one-piece wiper with a vulcanized metal supporting ring, and is available in NBR, FKM or polyurethane (TPU).
The Scraper A9 in:
- NBR is suitable for hydraulic and pneumatic applications
- FKM is particularly suitable for applications where a higher chemical resistance is required.
- TPU is for mobile hydraulics with heavy dirt.
The vulcanized metal supporting ring ensures a greater stability and allows simple groove design and installation.
The Scraper A9 has a material hardness range of 90 to 95 Shore A, depending on the material used.
fields of application

static

dynamic

single-acting

double-acting

linear

rotatory

oscillating
materials
elastomers,
metal,
polyurethane
technical data
material | NBR |
pressure | - |
temperature | -40°C / +100°C (material dependent) |
speed | 1 m/s |
material | FKM |
pressure | - |
temperature | -20°C / +200°C (material dependent) |
speed | 1 m/s |
material | TPU |
pressure | - |
temperature | -40°C / +100°C (material dependent) |
speed | 1 m/s |
Maximum values temperature, speed and pressure are simultaneously not applicable! The values vary in dependence of material and media. For technical queries please contact our application consultants – we have the right solution for you.

Your contact person regarding
Technical topics - special designs
Do you have any questions, ideas or suggestions?
We would be happy to advise you.
Personally, by phone or in digital form.
Mr. Andreas Raidt+49 (0) 7034 2518 - 240