The Scraper A6 is a one-piece scraper and is available in NBR, FKM or polyurethane (TPU). Standard sizes have additional studs on the inner diameter to prevent tilting in the groove. The Scraper A6 in NBR is suitable for hydraulic and pneumatic applications, FKM is particularly suitable for applications where a higher chemical resistance is required.
The A6 in TPU is for mobile hydraulics with heavy dirt or for applications particularly for wear resistance when needed. Standard sizes have additional studs on the inner diameter to safeguard the function. The Scraper A6 has a material hardness of 90 to 95 Shore A.
Scraper A6
Fields of application
static
dynamic
single acting
double acting
Linear
Rotating
oszilating
Main use
applications for hydraulic and pneumatic cylinders
Materials
elastomers, polyurethane
Technical values
Materials
Pressure
-
Temperature
-40°C / +100 °C (material dependent)
Speed
up to 1 m/s
Pressure
-
Temperature
-40°C / +100°C (material dependent)
Speed
up to 1 m/s
Pressure
-
Temperature
-20°C / +200°C (material dependent)
Speed
up to 1 m/s
Maximum values temperature, speed and pressure are simultaneously not applicable! The values vary in dependence of material and media. For technical queries please contact our application consultants – we have the right solution for you.
Downloads
More Scrapers
Scraper A7
Your contact person for
Technology - General sealing topics, special constructions
Mr. Andreas Raidt
Head of Engineering
Head of Engineering
Do you have any questions, ideas, or suggestions? We are more than happy to assist you with advice. In person, over the phone, or digitally.
Our Logistics – Your Service
Innovative, environmentally friendly and efficient
In addition to innovative techniques, our logistics has 2,870 sqm of process surface. We have the world's first AutoStore storage system on two levels. Both grits are connected to each other by means of special lifters. In total, up to 31,000 containers can be stored in a very confined space. Due to this subdivision, up to 240,000 storage areas can be managed most efficiently.