
Rotary Seals
V-ring
Very cheap, flexible and elastic sealing ring for pressureless shaft and bearing sealings. A V-ring provides an axial sealing against vertical face surfaces. The high flexibility and adaptability of the sealing lip tolerate large tolerances and angular deviations.
V-ring VE
The V-ring VE is an axial sealing, single-acting sealant for non-pressurized shaft and bearing sealing applications. In contrast to radial oil shaft seals, V-rings seal against the vertical arranged front surface.
Due to the reinforced gasket body, the V-ring VE provides a tighter fit on the shaft. For an improved axial fixation a clamping band can also be used as a safeguard if needed. V-ring VE is particularly suitable for high loads.
When mounting, the V-ring VE is to be expanded on the inner diameter and ensures a tight fit on the shaft.
Standard elastomer materials are NBR with ozone resistance and FKM. Further materials are available upon demand.







material | NBR |
pressure | - |
temperature | -30°C / +100°C (material dependent) |
speed | up to 8 m/s up to 12 m/s with axial fixation |
material | FKM |
pressure | - |
temperature | -20°C / +200°C (material dependent) |
speed | up to 8 m/s up to 12 m/s with axial fixation |

Your contact person regarding
Technical topics - special designs
Do you have any questions, ideas or suggestions?
We would be happy to advise you.
Personally, by phone or in digital form.
Mr. Andreas Raidt+49 (0) 7034 2518 - 240