
Static Seals
U-ring
Elastomeric gaskets to seal connecting elements and screw-in spigots. Applications with a mere elastomer or elastomer-metal bonding.
U-ring Type US
The US bonded seal consist of a metallic ring with a molded, trapezoidal seal made of elastomer without a centring embossment. By tightening the screw, the elastic sealing lip gets pressed between the two flat surfaces. The compression of elastomer is limited to the strength of the metal ring. As soon as pressure applies, the sealing effect is additionally increased.
In addition to the standard elastomers, such as NBR, EPDM and FKM, different steel qualities are available such as standard steel (1.0330 galvanized) and stainless steel (1.4301).







material | NBR |
pressure | up to 100 MPa (installed into a countersink) up to 40 MPa (installed into a countersink at < Ø40 mm) up to 25 MPa (installed into a countersink at > Ø40 mm) |
temperature | -30°C / +80°C (material dependent) |
speed | - |
material | FKM |
pressure | up to 100 MPa (installed into a countersink) up to 40 MPa (installed into a countersink at < Ø40 mm) up to 25 MPa (installed into a countersink at > Ø40 mm) |
temperature | -20°C / +200°C (material dependent) |
speed | - |
material | EPDM |
pressure | up to 100 MPa (installed into a countersink) up to 40 MPa (installed into a countersink at < Ø40 mm) up to 25 MPa (installed into a countersink bei > Ø40 mm) |
temperature | -40°C / +130°C (material dependent) |
speed | - |

Your contact person regarding
Technical topics - special designs
Do you have any questions, ideas or suggestions?
We would be happy to advise you.
Personally, by phone or in digital form.
Mr. Andreas Raidt+49 (0) 7034 2518 - 240